AG旗舰厅

Innovative industry technology

Working principle of temperature control switch of hair drye

2020-04-30

Temperature control switch is also called temperature protector or temperature controller, referred to as temperature controller.
 
It is a series of automatic control elements that can be physically deformed inside the switch according to the temperature change of the working environment, thereby generating some special effects and generating on or off actions.
 
The working principle of the temperature control switch of the hair dryer: the hair dryer is equipped with a temperature protector (thermostat) near the heating element of the heating element. When the hair dryer is working in the hot air position, the temperature control element can work normally under the condition of the fan , Automatically connect the circuit, and automatically cut off the circuit when encountering special conditions (such as overheating of electric heating elements).
The working principle of the hair dryer: The hair dryer directly drives the rotor to rotate the fan blades by the motor. When the fan blades rotate, air is sucked in from the air inlet, and the resulting centrifugal air flow is blown out from the front mouth of the fan. When the air passes through, if the heating wire installed on the heating bracket in the tuyere has been energized to become hot, then blowing out hot air; if the selection switch does not make the heating wire energized to generate heat, then blowing out cold wind. The hair dryer is here to achieve the purpose of drying and shaping.
 
Use and maintenance of electric hair dryer:
 
Must be used under the specified rated voltage, if there is a ground wire, it must be well grounded.
 
The air outlet of the hair dryer should be kept unobstructed, and there should be no foreign objects in the air outlet.
 
Keep at least 50mm distance when blowing wet objects.
 
At the end of use, it is necessary to switch from hot gear to cold gear as much as possible.
 
The hair dryer is best used intermittently, do not use it for a long time.
 
The blower should not be thrown or collided at will, so as not to damage the internal components.
 
上一篇:What is the role of Zhishui tablets?
下一篇:What is the difference between thermal protector and current